How to measure torsion spring
How to measure torsion spring
To measure garage door springs, you will need to follow the steps below:
- Close the garage door: Ensure the garage door is closed and secure.
- Measure the length of the spring: Measure from one end of the spring to the other using a tape measure.
- Determine the spring coil size: Using a caliper, measure the diameter of 10 coils on the spring. Divide the total by 10 to get the average size.
- Count the number of coils: Count the number of coils on the spring with a pen and paper.
- Measure the wire size: Using a micrometer, measure the thickness of the wire on the spring.
By following these steps and accurately measuring all the required parts, you should be able to determine the correct size of garage door spring needed for replacement or repair. Please note that it is important to take all necessary precautions when working with garage door springs, as they are under high tension and can be dangerous if not handled properly. It may be best to seek professional help if you are unsure of how to proceed.